![]() Confirm that you’re connecting to an individual folder.If you’re trying to connect to the NAS without specifying a folder (using the IP address or server name only), you will potentially run into issues. Always connect to an individual folder and mount multiple if necessary. This tutorial looked at how to map a Windows network drive on a Synology NAS. The actual process for mapping the network drive is incredibly straightforward, but sometimes you’ll run into issues if you don’t have SMB configured or the firewall rules set up properly. Index Of Ftp Hdd1HDD1: 500GB (Data Drive) Laptop - Dell Precision M6700 Board. Thanks for checking out the tutorial on how to map a Windows network drive on a Synology NAS. You need to map to the device like this: SynServerhome because it will auto route to their home drive based on who authenticates. Edition Panem Map Download my/ ftp://212 HDD1:WD3200JS HDD1:WD3200JS. Select the type of media, and then you should be able to select the Movies or TV shows from your new /media/Plex folder (which is really your MyBook).I’ll send you a screenshot of profiles if that helps. So, also, you should now be able to "Add Section" in the Plex Media Server web UI by clicking the big + sign in the My Library section (below in red). Your MyBook's Plex folder should now show up in the left-hand sidebar! Now, to test, type in terminal: sudo mount -aĪnd open Nautilus (the file manager). *Sidenote: If you use a password protected NAS, use this line instead: //192.168.0.13/Plex /media/Plex Since you said there's no password, guest should work. Don't touch anything already added to the document, but add to the end of that document this line: //192.168.0.13/Plex /media/Plex cifs guest 0 0 This will open /etc/fstab in the text editor with write permissions. Still in the terminal, type: sudo gedit /etc/fstab (Now you've got a backup copy called fstab.bak) You can do this by entering in terminal: sudo cp /etc/fstab /etc/fstab.bak You may wish to backup /etc/fstab first (in case something goes wrong your you want to undo this easily). Then, you'll want to edit your /etc/fstab - this is what tells Ubuntu what to drives to mount (and where) when it starts up. Now, let's install CIFS Utilities: sudo apt-get install cifs-utils You'll need to enter your password, because usually only the operating system edits things in /media) (This assumes you don't already have that directory. Once you decide, open a terminal and type: sudo mkdir /media/Plex I would suggest something like /media/Plex. You'll need to decide where you want the mounted files from MyBook to appear in your filesystem. I'm not really that familiar with NFS, but this is how you can do it with CIFS (the successor to Samba - should be compatible with your MyBook if MyBook supports Samba).I don't believe Plex has any way to access drives from a network location, but like this thread on Plex for Mac suggests - if you are able to mount them within the local filesystem, then you should be able to do it with no problem. If someone could help me I would be grateful. I have read various things and tried several different things, but no luck. IP address of the mybook is 192.168.0.13. There isn't a username or password needed to get into the shared folder "Plex". I know this will be fixed when the shared folder "Plex" is mounted/mapped correctly. ![]() Also I just don't understand how to add it into plex. I don't know how to mount/map this properly to keep this mounted every time there is a reboot needed. I created a folder called Plex which then has sub-directories: So I understand with this there are shared folders on this drive. Everything was working on Ubuntu 13.04 running PMS and a external USB HDD hooked up to it until I got a NAS WD MyBookLive 3TB drive. I like Ubuntu and want to use it instead of windows. So I've been looking around and can't find an exact solution to my problem.
0 Comments
Leave a Reply. |